
1.When controlling the camera and
Printed circuit board |
|
switches: | |
Analog settings |
Coaxial cables:
Genlock signals must be supplied when more than one camera and
BELDEN 8281, max. 3,280 feet
(1,000 meters) | ||
| ||
Y/VIDEO OUT |
| |
G/L IN |
| |
CONTRTOL IN IP/RP |
| |
10BASET straight cable: | VIDEO/Y IN | |
UTP category 5, |
| |
max. 3,280 feet (1,000 meters) | G/L OUT | |
| VIDEO/Y OUT | |
REMOTE |
| |
Cable with a nominal cross | CONTROL OUT TO | |
section of 1.25 mm2 or more | ||
PAN/TILT HEAD | ||
max. 98.4 feet (30 meters) | Color monitor | |
| ||
O I |
| |
| VIDEO IN | |
AC adapter: | Coaxial cable: | |
BELDEN 8281 | ||
|
Personal computer
(Windows)
O Use the
O Set the printed circuit board switches to the analog settings.
O Use a coaxial cable (BELDEN 8281) to connect the Y/VIDEO OUT connector on the
O Use a 10BaseT straight cable (UTP category 5) to connect the CONTROL IN IP/RP connector on the
O Use a coaxial cable (BELDEN 8281) to connect the VIDEO/Y OUT connector on the controller with the VIDEO input connector on the color monitor.
O Check that the
23