Examples of connections

4. When connecting a pan-tilt head through a network and controlling the camera

and pan-tilt head using a personal computer

Printed circuit board

Pan-tilt head cable:

switches:

WEB settings

AW-CA50F29

 

 

10BaseT straight cable:

UTP category 5, max. 328 feet (100 meters)

HUB

CONTROL IN IP/RP

Cable with a nominal cross section of 1.25 mm2 or more

max. 98.4 feet (30 meters)

O I

AC adapter:

AW-PS300

10BaseT straight cable:

UTP category 5, max. 328 feet (100 meters)

Personal computer

(Windows)

O Use the camera/pan-tilt head connecting cable (AW-CA50F29) to connect the pan-tilt head with the convertible camera in which a WEB card (AW-PB309), etc. has been installed.

O Set the printed circuit board switches to the WEB settings.

O Use a 10BaseT straight cable (UTP category 5) to connect the personal computer (Windows) and convertible camera via a hub.

O Install browser software (Netscape or Internet Explorer) in the personal computer (Windows).

O Use the browser software to input the IP address which was set on the WEB card, and check that the pan-tilt head and camera can be controlled using the personal computer.

26