Operating Instructions
30
2.4 Registering the Camera
Before you can view or record images, each camera must be configured on this
software.
If you change the destination folder from the default folder of this software,
select a folder to save images in advance (see page 23).
The camera information can be imported and exported (see page 72).

2.4.1 Creating New Camera

1. Select [Camera] [Create New Camera] on the menu bar.
You can create a camera on the menu displayed by right-clicking on the
camera list (see page 66).
The create new camera page is displayed.
2. Set the parameters and click [OK].
The camera preview is displayed on the camera list.
Page Selection Tab
Basic Settings : Displays the setup page for the camera name and IP
address (see page 31).
Image Settings : Displays the setup page for the image size and recording
method (see page 33).
Recording Capacity
Limit
: Displays the setup page for the recording capacity limit
value (see page 34).
Motion Detection : Displays the setup page for the motion detection
recording (see page 35).
Keyword : Displays the setup page for recorded image keyword
(see page 37).