Operating Instructions
84
JPEG Conversion
Message Cause and Remedy
"Start Time" should be within the
recording time.
• The start time is not within the recording time.
Follow the instruction message.
Set the "Start Time" so that it
comes before the End Time.
• The start time comes after the end time.
Follow the instruction message.
Set the "End Time" to within the
recording time.
• The end time is not within the recording time.
Follow the instruction message.
"Conversion Interval" should be
between 1 and (the number of
images - 1).
• The frequency is not between 1 and (end time
- start time [seconds]), or the space was blank.
Follow the instruction message.
"Conversion Interval" should be
between 1 and (end time - start
time [seconds]).
• The number is larger than the time period
between the start time and end time.
Follow the instruction message.
"Conversion Interval" should be
between 1 and 3600.
• The image is recorded for more than 1 hour,
but the converted interval is not between 1 and
3600.
Follow the instruction message.
The conversion file is possibly
being used in another application.
Confirm that it is not being used
and try again.
• The converted file has been opened in
another application.
Close other applications and try again.
The recorded images could not be
found. Refresh the Recorded
Image List and try again.
• There is no recorded images.
Refresh the recorded images and try
again.
A write error has occurred. • An error has occurred in JPEG conversion.