16.1.3Removing the Control P.C. Board
6Remove the drip proof cover.
7Disconnect the connectors (lead wires of the compressor, sensor, and others).
8Remove the screw at the right side of the control box, and pull out the entire control box.
9Release the control P.C. Board tab to remove the control P.C. Board.
16.1.4Removing the Propeller Fan and Fan Motor
1Follow the steps in 16.1.1 for removing the cabinet top plate and cabinet front plate.
2Remove the propeller fan by removing the nut turning clockwise at its center.
33
