16. Disassembly and Assembly Instructions
WARNING
High Voltage are generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding with repair work. Failure to heed this caution may result in electric shocks.
16.1 Outdoor Unit Removal Procedure
Caution! When handling electronic controller, be careful of electrostatic discharge.
16.1.1Removing the Cabinet Top Plate and Cabinet Front Plate
1Remove the cabinet top plate (remove the 8 screws).
2Remove the 8 screws (1 on the center, 3 at the top and 4 at the bottom) securing the cabinet front plate, release the 2 hooks
(1 each at the left and right), and pull the cabinet front plate toward front side.
16.1.2Remove the Control Board Cover and Particular Plates
3Remove the control board cover (remove 3 screws).
4Remove the particular plate (remove 2 screws).
5Remove the particular plate (remove 2 screws).
32
