USING THE REMOTE CONTROLLER (CONTINUED)
How to Use the Remote When using the remote controller, always point the unit’s transmitter head directly Controller at the air conditioner’s receiver.
Air Conditioner (Indoor unit)
| Receiver |
Remote Controller | (Transmitter head) |
Remote Controller Installation The remote controller may be operated either from a
not install the remote controller in the following places:
•In direct sunlight
•Behind a curtain or other places where it is covered
•More than 26 ft (8 m) away from the air conditioner
•In the path of the air conditioner’s airstream
•Where it may become extremely hot or cold
•Where it may be subject to electrical or magnetic noise
•Where there is an obstacle between the remote controller and air conditioner (since a check signal is sent from the remote controller every 5 minutes)
Mounting the Remote Before mounting the remote controller, press the ON/OFF operation button at the Controller mounting location to make sure that the air conditioner operates from that
location. The indoor unit should make a beeping sound to indicate that it has received the signal.
Remote Control
Holder
Mounting Screws |
5/32 x 5/8" (4 x 16 mm) |
(included) |
Press
Set in place
Rear Side
Hole
•To prevent loss of the remote controller, you can connect the remote controller to the holder by passing a string through the remote controller and attachment hole.
| To take out the remote controller, pull it forward. |
When Holding the Remote | • When using the remote controller and during air conditioner operation, the |
Controller | transmitter on the remote controller should be pointed towards the receiver on |
| the indoor unit. |
| • Make sure that there are no objects between the remote controller and |
| receiver which could block the signal. |
11
