Call Park Key Telephone Features
3-18 DBS 824-3.0/3.2-700 Revised April 2000
2. Dial “75.”
“Park Hold” appears on the display.
To retrieve a parked call:
1. Pick up the handset.
The phone issues intercom dial tone.
2. Dial “76.”
3. Dial the number of the extension that parked the call.
“CO TALK TRK #XX” (where “XX” is the line number) appears on the
display.
Related Programming
• FF1 (System): Attendant Park Hold Recall Timer
• FF1 (System): Extension Park Hold Recall Timer
Considerations
• An alarm tone is issued if a parked call is not released before the Recall
Timer expires (determined by system programming). If this happens, the
user that parked the call can retrieve it by simply picking up the handset. If
no one retrieves the call after the Recall Timer expires, a second alarm will
sound at an attendant phone(s).
• You cannot park more than one outside line at a time.
• The Attendant Phone cannot use this feature. The Attendant must use the
Attendant Call Park feature.
• The Call Park Recall Timer is similar to the Recall Timer, except that
when the Call Park Recall Timer is set for “0” a call is recalled
automatically in three minutes.
• You can store “75” on an FF key and use it as a Call Park key. After
placing an outside call on hold, press the Call Park key to park the call. The
Call Park LED will light while the call is parked and then go off when the
call is released.