DSLT Features Intercom Calling
Revised April 2000 DBS 824-3.0/3.2-700 4-23
differently, depending on whether they are trunk or intercom calls.
Intercom calls receive busy tone; trunk calls are routed to the extension
defined in permanent call forwarding.
The following types of incoming trunk calls will follow permanent call
forward settings:
- Direct trunk calls
- Transferred trunk calls.
• The DND feature cannot be activated at an extension selected to receive
Call Forwarding.
Intercom Calling
(CPC-S and CPC-M)
Descriptions
The DBS 824 provides two methods of intercom calling: voice calling and
tone calling.
Voice Calling. With voice calling, intercom calls are connected
immediately, without a ringing tone.
Tone Calling. With tone calls, a ringing tone is sent to the called extension.
System programming determines whether the DBS 824 uses voice or tone
calling as a default. If voice calling is the default, dialing a “1” after the
extension number will change the call to a tone call. If tone calling is the
default, dialing a “1” will result in a voice call.
Operation
To make a Voice Call:
1. Lift the handset.
2. Dial the extension number.
3. If the system default is tone calling, dial a “1.”