Key Telephone Features Line Appearances
Revised April 2000 DBS 824-3.0/3.2-700 3-47
• “CO TALK #XX” (where “XX” is the line number) appears on the
display.
2. Press the
REDIAL key.
The last number dialed appears on the display.
3. Complete the call and replace the handset.
The line key LED changes from green to red and then goes off.
Considerations
• If the Auto Flash Redial feature is set, you ca n flash the outside line once
by pressing the REDIAL key at the busy tone. You can then redial the last
number dialed.
• The Last Number Redial fea ture can redial a number up to sixteen digits
long.
• A maximum of five Speed Dialing codes can be redialed.
Line Appearances(CPC-S and CPC-M)
The DBS 824 provides up to four types of line appearances.
The following table summarizes how each type of line appearance is used:
Table 3-6. MCO and ML key definitions
Key Definition
DSS/BLF Appear-
ances DSS/BLF keys provide one-touch dialing, direct station selection
(DSS), and busy lamp fields (BLF) for extensions.
Direct Line (DL)
Appearances DL keys are used to originate and receive calls over specific trunk
numbers.
Multi-CO (MCO)
Appearances MCO keys are used to originate and receive CO calls.
Multi-Line (ML)
Appearances ML keys are used to originate and receive CO line calls and intercom
calls.