Recording
- 118 -
Applicable modes:
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVI TY] may be set higher than
[ISO100] if the picture is taken with [I.DYNAMIC] set to valid.
•Compensation effect may not be achieved depending on the conditions.
•[ ] in the screen turns to yellow when [I.DY NAMIC] is in effect.
•[LOW], [STANDARD], or [HIGH] represents th e maximum range of effect.
Applicable modes:
You can take a picture brightly in dark places by setting [MIN . SH T R SP EED ] s low er. Also,
you can set it faster to reduce the blur of the subject.
[AUTO], [1/250], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]
Note
•This should usually be set to [AUTO] to take pictures. (When you select a minimum shutter
speed other than [AUTO], [ ] appears on the screen.)
•When [AUTO] is selected, shutter speed may be set up to 1 second when there is not much
jitter to adjust with the [STABILIZER], or when [STABILIZER] is set to [OFF].
•Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the Self-timer for taking pictures.
•Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash in
red when the shutter button is pressed halfway.
[I.DYNAMIC] (Intelligent dynamic range control)[MIN. SHTR SPEED]
Minimum shutter speed setting 1/250 1
Brightness Darker Brighter
Jitter Less More