Panasonic DMCFZ47K, DMC-FZ47, VQT3R48 owner manual 181, Motion picture recording stops in the middle

Others

The brightness or the hue of the recorded picture is different from the actual scene.

•When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may introduce slight changes to brightness and color. These are a result of the characteristics of the light source and do not indicate a malfunction.

When recording pictures or half-pressing the shutter button, reddish stripes may appear on the LCD monitor. Alternatively, part or all of the LCD monitor may turn a reddish color.

•This is a characteristic of CCDs, and it appears when the subject has a bright part. Some unevenness may occur in the surrounding areas, but this is not a malfunction.

It is recorded in motion pictures but is not recorded on still pictures.

•It is recommended that you take pictures while taking care not to expose the screen to sunlight or any other source of strong light.

Motion picture recording stops in the middle.

•Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.

•Depending on the type of the card, recording may stop in the middle.

>If motion picture recording stops during use of a card of at least “Class 4” or if you use a card that has been formatted on a PC or other equipment, the data-writing speed is lower. In such cases, we recommend that you make a backup of the data and then format (P58) the card in this unit.

Zoom does not operate properly.

•Is the [CONVERSION] (P122) set to [ ] or [ C ]?

Subject cannot be locked. (AF tracking not possible)

•Set the AF area to the distinctive color of the subject if there is a part that is different from the surrounding color. (P114)

- 181 -