- 69 -
Recording
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
Press 3 [È] several times to display [FLASH], and then press 2/1 to set the flash output.
You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV].
Select [0 EV] to return to the original flash output.
Press [MENU/SET] to clos e the menu.
Note
When the flash output is adjusted, the flash output value appears on the upper left of the
screen.
The flash output setting is memorized even if the camera is turned off.
You cannot set [FLASH] in the following cases.
In Intelligent Auto Mode
In [EXPRESSIVE], [RETRO], [HIGHKEY], [SEPIA] and [MINIATUREEFFECT] in Creative
Control Mode
In [SCENERY]
In [NIGHT SCENERY], [HANDHELD NITE SH OT] and [ILLUMINATIONS] in
[NIGHT PORTRAIT]
In [PANORAMAASSIST], [SUNSET], [HI-SPEED BURST], [FLASHBURST],
[STARRYSKY], [FIREWORKS], [AERIAL PHOTO] and [3D PHOTO MODE] in Scene Mode
In Creative Video Mode
Adjust the flash output