Panasonic VQT3R48, DMC-FZ47 131, Upload SET, Select the picture, and then press MENU/SET to set

Playback/Editing

[UPLOAD SET]

It is possible to setup the images to be uploaded to the image sharing sites (Facebook/ YouTube) on this unit.

•You can only upload motion pictures to YouTube, while you may upload both motion pictures and still pictures to Facebook.

•This cannot be done to the images in the built-in memory. Copy the images to a card (P145), and then perform the [UPLOAD SET].

Select [UPLOAD SET] on the [PLAYBACK] Mode menu. (P46)

Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/

SET].

[SINGLE][MULTI]

Select the picture, and then press [MENU/SET] to set.

[MULTI] setting

Press [DISPLAY] to set (repeat), and then press [MENU/SET] to set.

•The setting is canceled when [DISPLAY] is pressed again.

•Confirmation screen is displayed. It is executed when [YES] is selected. Exit the menu after it is executed.

∫Upload to the image sharing sites

Press 2/1 to select Press 3/4/2/1 to

the picture. select the pictures.

An upload tool built-in to the camera “LUMIX Image Uploader” is automatically copied to the card when you setup [UPLOAD SET].

Perform the upload operation after connecting the camera to a PC (P155). For details, refer to P158.

∫Canceling all the [UPLOAD SET] settings

1Select [UPLOAD SET] on the [PLAYBACK] Mode menu.

2Press 3/4 to select [CANCEL] and then press [MENU/SET].

•Confirmation screen is displayed. It is executed when [YES] is selected. Exit the menu after it is executed.

Note

•Setting may not be possible for pictures recorded with other cameras.

•It cannot be set with a card with less than 512 MB of memory.

- 131 -