Preparation
- 18 -
Inserting and Removing the Card (optional)/the Battery
•Turn the power switch to [OFF] and confirm that the lens barrel is retrac ted.
•We recommend using a Panasonic card.
Slide the release lever in the direction of
the arrow and open the card/battery
door.
•Always use genuine Panasonic batteries.
•If you use other batteries, we cannot guarantee
the quality of this product.
Battery: Being careful about the battery
orientation, insert all the way until you
hear a locking sound and then check that
it is locked by lever A.
Pull the lever A in the direction of the
arrow to remove the battery.
Card: Push it securely all the way until
you hear a “click” while being careful
about the direction in which you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
B:Do not touch the connection terminals of the
card.
1:Close the card/battery door.
2:Slide the release lever in the direction
of the arrow.
Note
•Remove the battery after use. (The battery will be exhausted if le ft fo r a long peri od of ti me after
being charged.)
•Remove the card or battery after turning off the power, with the power lamp completely turned
off and the lens barrel retracted completely . (Th e camera may not func tio n properl y, or the card
or recorded contents may be damaged.)
•When using an AC adaptor (optional) instead of the battery, refer to P166.
B