Panasonic DMCFZ47K 1SEC 2SEC, Reset the file number of the next recording to, Auto Review

Basic

[PLAY ON LCD]

If you selected the Viewfinder in a Recording Mode, the display will automatically switch to the LCD monitor when playing back the pictures.

[OFF]

[ON]:

The LCD monitor is turned on when switching from Recording Mode to Playback Mode.

You can save the time it would take to switch the display to the LCD monitor even when using the Viewfinder to record.

o[AUTO REVIEW]

Set the length of time that the picture is displayed after taking the still picture.

[OFF]

[1SEC.]

[2SEC.]

[HOLD]: The pictures are displayed until one of the buttons is pressed.

•[AUTO REVIEW] is activated regardless of its setting in the following cases.

–When using Auto Bracket

–[HANDHELD NITE SHOT] in [NIGHT PORTRAIT]

–[HI-SPEED BURST] and [FLASH BURST] in Scene Mode

–During the Burst Mode

•In Intelligent Auto Mode or [PHOTO FRAME] in Scene Mode, the Auto Review function is fixed to [2SEC.].

•[AUTO REVIEW] does not work when recording motion pictures.

v[NO.RESET]

Reset the file number of the next recording to 0001.

•The folder number is updated and the file number starts from 0001.

•A folder number between 100 and 999 can be assigned.

When the folder number reaches 999, the number cannot be reset. We recommend formatting the card (P58) after saving the data on a PC or elsewhere.

•To reset the folder number to 100, format the built-in memory or the card first and then use this function to reset the file number.

A reset screen for the folder number will then appear. Select [YES] to reset the folder number.

- 55 -