Panasonic DMCFZ47K, VQT3R48 Taking Close-up Pictures AF MACRO/MACRO Zoom, Position 1 cm 0.04 feet

Recording

Applicable modes:

Taking Close-up Pictures ([AF MACRO]/[MACRO ZOOM])

Press [AF/AF#/MF] to display the focus switching screen.

Press 3/4 to select [AF MACRO] or [MACRO

ZOOM], and then press [MENU/SET].

•To cancel, select [AF].

Item		Description of settings
	This mode allows you to take close-up pictures of a subject,
	e.g. when taking pictures of flowers. You can take pictures
[AF MACRO]	of a subject as close as 1 cm (0.04 feet) from the lens by
	rotating the zoom lever upmost to Wide (1k).
	• [	] is displayed during AF Macro Mode.
	You can take a picture with the Digital Zoom up to 3k while
	maintaining the distance to the subject for the extreme Wide
[MACRO ZOOM]	position [1 cm (0.04 feet)].
	• The image quality is poorer than during normal recording.
	• Zoom range will be displayed in blue. (digital zoom range)
	• [	] is displayed during Macro Zoom Mode.

Note

•We recommend using a tripod and the Self-timer.

•We recommend setting the flash to [Œ] (close the flash) when you take pictures at close range.

•If the distance between the camera and the subject is beyond the focus range of the camera, the picture may not be properly focused even if the focus indication lights.

•When a subject is close to the camera, the effective focus range is significantly narrowed. Therefore, if the distance between the camera and the subject is changed after focusing on the subject, it may become difficult to focus on it again.

•Macro Mode gives priority to a subject close to the camera. Therefore, if the distance between the camera and the subject is far, it takes longer to focus on it.

•When you take pictures at close range, the resolution of the periphery of the picture may decrease slightly. This is not a malfunction.

•If the lens becomes dirty with fingerprints or dust, the lens may not be able to focus on the subject correctly.

•It is not possible to set [AF MACRO]/[MACRO ZOOM] in the following cases.

–In all Scene Modes except [3D PHOTO MODE]

–In [HIGH DYNAMIC], [PIN HOLE] and [FILM GRAIN] in Creative Control Mode

•It is not possible to set [MACRO ZOOM] in the following cases.

–In [MINIATURE EFFECT] in Creative Control Mode

– When [ ] in [AF MODE] is set

–When [CONVERSION] is set

- 70 -