Panasonic VQT3R48, DMC-FZ47, DMCFZ47K owner manual Panorama Assist, Party

Recording

[PANORAMA ASSIST]

You can take pictures with connections suitable for creating panorama images.

∫Setting the recording direction

1Press 3/4 to select the recording direction and then press [MENU/SET].

•The horizontal/vertical guideline will be displayed.

2Take the picture.

•You can retake the picture by selecting [RETAKE].

3Press 3 to select [NEXT] and then press [MENU/SET].

•Part of the recorded image is displayed as a transparent image.

4Take picture after moving the camera horizontally or vertically so the transparent image overlaps.

•When taking the third and later pictures, repeat steps 3 and 4.

5Press 3/4 to select [EXIT] and then press [MENU/SET].

Note

•The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the settings for the first picture.

•We recommend using a tripod. When it is dark, we recommend using the Self-timer for taking pictures.

•Shutter speed may slow down up to 8 seconds.

•The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal processing. This is not a malfunction.

•The recorded images can be combined into panorama pictures using the software “PHOTOfunSTUDIO” on the CD-ROM (supplied).

[PARTY]

Select this when you want to take pictures at a wedding reception, an indoor party etc. This allows you to take pictures of people and the background with near real-life brightness.

∫Technique for Party Mode

•Open the flash. (You can set to [ ] or [ ].)

•We recommend using a tripod and the Self-timer for taking pictures.

•We recommend rotating the zoom lever to Wide (1k) and being about 1.5 m (4.92 feet) from the subject when taking pictures.

- 86 -