- 125 -
Recording
Note
The settings of the aperture value, shutter speed and exposure compensation can be changed
during motion picture recording. In this case, care must be taken because the sounds of such
operations may be recorded.
Manually setting a higher shutter speed may increase the noise on-screen due to the higher sensitivity.
When recording under lighting such as fluorescent lighting, LED lighting, mercury lighting and
sodium lighting, the coloring and brightness of the screen may change.
Refer to
Recording Motion Pictures
on P41 for other settings and operations for recording motion pictures.
Using the [ ]([High Speed Video]) mode, you can record very fast motions that cannot be
tracked by the naked eye at the rate of up to 240 frames/second.
Motion pictures are recorded in [MP4].
1Set the mode dial to [ ].
2Press 3

/

4 to select [ ] and then press [MENU/SET].

3Press 3

/

4 to select the picture quality and then press [MENU/SET].

You can also select the recording quality from [High Speed Video] (P150) in the [Motion
Picture] menu.
Note
It cannot be recorded into the built-in memory.
Audio is not recorded.
Motion picture can be recorded continuously for up to 4 GB.
The camera can record motion pictures for up to 29 minutes 59 se conds in play back time e quiva lent.
The focus, zoom, exposure and White Balance is fixed to the value a t the b egin ning of th e recor ding
motion picture.
Under fluorescent lighting, flicker or horizontal bars may be seen.

Recording the High Speed Motion Picture (DMC-FZ200)