- 145 -
Recording
Applicable modes:
Adjust the flash output if the recorded pictures are too bright or too dark.
Note
You can adjust from [j2EV] to [i2 EV] in steps of [1/3 EV].
Select [0 EV] to return to the origi nal flash output.
[i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
Applicable modes:
When Red-Eye Reduction ([ ], [ ]) is selected, Red-Eye Removal is performed
whenever the flash is used. The camera automatically detects red-eye and corrects the picture.
Settings: [ON]/[OFF]
Note
Only available when [AF Mode] is set to [š] and Face Detection is active.
Under certain circumstances, red-eye cannot be corrected.
It will be fixed to [ON] during the Intelligent Auto Mode.
[Red-Eye Removal] cannot be used in the following cases.
[3D Photo Mode] (Scene Mode)
Applicable modes:
With the optional conversion lenses, you can record even more faraway pictures and take
close-up pictures of smaller subjects.
Note
Refer to P194 for details about attaching the lens.
Ensure that [Conversion] is set to [OFF] when not using a conversion lens.
[Conversion] cannot be used in the following cases.
[Panorama Shot]/[3D Photo Mode] (Scene Mode)
Read the operating instructions of the conversion lens for details.
[Flash Adjust.][Red-Eye Removal][Conversion]
Settings Description of settings
[] When you attach the tele conversion lens.
[] When you attach the close-up lens.
[OFF]
C