- 157 -
Playback/Editing
∫Operations performed during slide show
The cursor displayed during playback is the same as 3/4/2/1.
¢Operable only in the following cases.
–in the Pause Mode
–during motion picture playback
–during panorama picture playback
∫Changing the slide show settings
You can change the settings for slide show playback by selecting [Effect] or [Setup] on the slide
show menu screen.
[Effect]
This allows you to select the screen effects when switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•When [URBAN] has been selected, the picture may appear in black and white as a screen effect.
•[AUTO] can be used only when [Category Selection] has been selected. The pictures are played
back with the recommended effects in each category.
•Some [Effect] will not operate when playing back pictures displayed vertically.
•Screen effects do not operate during a [3 D Pl ay ] slide show.
3Play/Pause
4Stop
2Back to previous picture¢
1Ahead to next picture¢
[W] Reduce volume level
[T] Increase volume level
(DMC-FZ200)
–during Burst Picture Group playback
(DMC-FZ200)
•[Effect] is fixed to [OFF] during the [Video Only] slide show, or during a slide show of [ ] in
[Category Selection].
•Even if [Effect] is set, it does not work during a slide show of burst picture group.
(DMC-FZ60)
•During the [Video Only] slide show, [Effect ] is fixed to [OFF].
WT