- 199 -
Others
The AC adaptor (optional) can only be used with the designated Panasonic DC coupler
(optional). The AC adaptor (optional) cannot be used by itself.
Preparations:
Turn this unit off and confirm that the lens barrel is retracted.
ACard/battery door
BDC coupler
CDC coupler cover
DAC adaptor
EAC cable
1Pull open the card/battery door and the DC coupler
cover.
2Insert the DC coupler into this unit.
Insert by pushing the center of the DC coupler.
Press on the DC coupler until it is locked by lever 1.
3Pull out the cable through the opening as shown in
the illustration and then close the card/battery door.
Be careful not to catch the cable when closing the card/
battery door.
4Plug the AC adaptor into an electrical outlet.
5Connect the AC adaptor to the [DC IN] socket of the DC coupler.
Note
Always use a genuine Panasonic AC adaptor (optional).
When using an AC adaptor, use the AC cable supplied with the AC adaptor.
If the AC adaptor and DC coupler are not necessary, then remove them from the digital camera.
Also, please keep the DC coupler cover closed.
Also read the operating instructions for the AC adaptor and DC coupler.
AC adaptor (optional)/DC coupler (optional)