- 163 -
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped in
prints using [Text Stamp] (P164).
1Select [Title Edit] on the [Playback] menu. (P52)
2Press 3/4 to select [Single] or [Multi] and then press [MENU/SET].
4Enter the text. (P132)
•Exit the menu after it is set.
Note
•To delete the title, erase all the text in the text input screen.
•You can print out texts (comments) using t he “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
•You cannot use [Title Edit] for the following pictures.
–Motion pictures
–3D pictures
–Pictures recorded with other equipment

[Title Edit]

3Select the picture, and then press
[MENU/SET] to set.
•[’] is displayed for pictures with titles
already registered.
[Multi] setting
Press [DISP.] to set (repeat), and then
press [MENU/SET] to set.
•The setting is canceled when [DIS P.] is
pressed again.
[Single] [Multi]
Press 2/1 to select
the picture. Press 3/4/2/1 to
select the pictures.
(DMC-FZ200)
•You can set up to 100 pictures at one time with [Multi].
(DMC-FZ60)
•You can set up to 50 pictures at one time with [Multi] .
(DMC-FZ200)
–Pictures taken with [ ], [ ] or [ ]
1 2 3
456