- 132 -
Recording
Entering Text
It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
1Display the entry screen.
•You can display the entry screen via the following operations.
–[Name] of [Baby1]/[Baby2] or [Pet] in Scene Mode
–[Name] in [Face Recog.]
–[Location] in [Travel Date]
–[Title Edit]
3Press 3/4/2/1 to move the cursor to [Set] and then press [MENU/SET]
to end text input.
Note
•Text can be scrolled if all of the entered text does not fit on the screen.
•It is displayed in order of title, location, [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]).
2Press 3/4/2/1 to select text and then press [MENU/
SET] to register.
•Move the cursor to [ ] and then press [MENU/SET] to switch text
between [A] (capitals), [a] (lower case), [1] (numbers) and [&]
(special characters).
•To enter the same character in a row , move t he cursor by sliding the zoom lever to t he [Z] (T)
side or rotating the rear dial to the right.
•The following operations can be performed by moving the cursor to the item and pressing
[MENU/SET]:
–[]]: Enter a blank
–[Delete]: Delete a character
–[ ]: Move the entry position cursor to the left
–[ ]: Move the entry position cursor to the right
•A maximum of 30 characters can be entered. (Maximum of 9 chara cter s wh en se tting name s
in [Face Recog.])
¢A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ] (Maximum of 6
characters when setting names in [Face Recog.]).