- 196 -
Others
After attaching the external flash (DMW-FL220, DMW-FL360, DMW-FL500: optional), the
effective range will be increased when compared to the camera’s built in flash.
Preparations:
Turn off the camera and close the built-in flash.
Using the dedicated flash (DMW-FL220: optional)
1Attach the dedicated flash to the hot shoe and then turn on the camera and the
dedicated flash.
Be sure to firmly secure to the dedicated flash with the lock ring .
2Select [Flash] on the [Rec] menu. (P52)
3Press 3/4 to select the mode and then press [MENU/SET].
While the external flash is connected, [Œ] is displayed on the screen.
4Press [MENU/SET] to close the menu.
When using other commercially available external flashes without communication
functions with the camera
It is necessary to set the exposure on the external flash. If you want to use the ext ernal fla sh in Auto
Mode, use an external flash that allows you to set the ap erture va lue and the ISO sensitiv ity to ma tch
the settings on the camera.
Set to Aperture-Priority AE Mode or Manual Exposure Mode on the camera and then set the same
aperture value and ISO sensitivity on the external flash. (The exposure c annot be compensated
adequately due to the change on the aperture value in Shutter-Priority AE Mode and the external
flash cannot control the light adequately in Program AE Mode because the aperture value cannot be
fixed.)
External Flash (optional) (DMC-FZ200)