- 173 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
1Select [Protect] on the [Playback] menu. (P52)
Canceling all the [Protect] settings
1Select [Protect] on the [Playback] menu.
2Press 3/4 to select [Cancel] and then press [MENU/SET].
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Note
The protect setting may not be effective on other equipment.
Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
Even if you do not protect pictures on a card, they cannot be deleted when the card’s Write-Protect
switch is set to [LOCK].

[Protect]

2Press 3/4 to select [Single] or [Multi] and then press [MENU/SET].
3Select the picture, and then press
[MENU/SET] to set.
The settings are canceled when [MENU/
SET] is pressed again.
Exit the menu after it is set.
[Single] [Multi]
Press 2/1 to select
the picture. Press 3/4/2/1 to
select the pictures.
1 2 3
456