Recording

Note

•It will be a normal motion picture recording when recording a motion picture.

•Aperture or shutter speed can be set by touching [F] (aperture) or [SS] (shutter speed) and then touching the exposure meter bar in the Quick Menu (P58).

•The brightness of the LCD monitor and the recorded pictures may differ. Check the pictures on the playback screen.

•Set the aperture value to a higher number when the subject is too bright in Aperture-Priority AE Mode. Set the aperture value to a lower number when the subject is too dim.

•When you use a lens with an aperture ring, the setting for the rear dial becomes effective if you rotate the aperture ring to the [A] position and the aperture ring setting takes priority if you rotate the aperture ring to a position other than [A] in Aperture-Priority AE Mode.

•The aperture value and the shutter speed displayed on the screen turn red and blink when the exposure is not adequate.

•We recommend using a tripod when the shutter speed is slow.

•In Shutter-Priority AE Mode, when the flash is activated, the fastest shutter speed that can be selected is 1/160th of a second. (P75)

•If you press the shutter button fully when the shutter speed is slow, the shutter speed on the screen counts down in Shutter-Priority AE Mode.

•In Shutter-Priority AE Mode the [ ] and [ ] mode are disabled.

•The [SENSITIVITY] is automatically set to [AUTO] when you switch the Recording Mode to Shutter-Priority AE Mode while the [SENSITIVITY] is set to [ ] (Intelligent).

- 101 -