Panasonic DMC-GF2 manual 61

Basic

[MONITOR]/

[VIEWFINDER]

Brightness, color, or red or blue tint of the LCD monitor/Optional Live Viewfinder is adjusted.

1Select the settings by pressing 3/

4, and adjust with 2/1 or the rear dial.

•There are 4 settings: [BRIGHTNESS],

[CONTRAST•SATURATION],

[RED TINT] (color adjustment between red and green), and [BLUE TINT]

(color adjustment between orange and blue).

2Press [MENU/SET] to set.

•It will adjust the LCD monitor when the LCD monitor is in use, and the viewfinder when Optional Live Viewfinder (P188) is in use.

•Some subjects may appear differently from actuality on the LCD monitor/viewfinder. However, this does not affect the recorded pictures.

	The brightness of the LCD monitor can be adjusted depending on
	how bright it is around the camera.
	„ [AUTO]:
	The brightness is adjusted automatically depending on how bright
LCD [LCD MODE]	it is around the camera.
	…1	[MODE1]:
	Make the LCD monitor brighter.
	…2	[MODE2]:
	Set the LCD monitor to the standard brightness.
	…3	[MODE3]:
	Make the LCD monitor darker.

•The brightness of the pictures displayed on the LCD monitor is increased so some subjects may appear differently from actuality on the LCD monitor. However, this does not affect the recorded pictures.

•The LCD monitor automatically returns to standard brightness after 30 seconds when recording in [MODE1]. Press any button to make the LCD monitor bright again.

•If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or another object to block the light.

•The number of recordable pictures decreases in [AUTO] and [MODE1].

•[AUTO] is only available in the Recording Mode.

•[AUTO] is disabled during motion picture recording.

•When the menu screen is displayed in a dark environment etc., the LCD monitor becomes darker even if [LCD MODE] is set to [MODE2].

•The initial setting when using the AC adapter (optional) is [MODE2].

- 61 -