Recording
[BABY1]/[BABY2]
This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [TEXT STAMP] (P153).
∫Birthday/Name setting
1Press 3/4 to select [AGE] or [NAME] and then press [MENU/SET].
2Press 3/4 to select [SET] and then press [MENU/SET].
3Enter the birthday or name.
Birthday: | 2/1: Select the items (year/month/day). |
| 3/4: Setting. |
| [MENU/SET]: Exit. |
Name: | For details on how to enter characters, refer to |
| “Entering Text” on P128. |
•When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
•If [ON] is selected when the birthday or name has not been registered, the setting screen appears automatically.
4Press 3/4 to select [EXIT] and then press [MENU/SET] to finish.
∫To cancel [AGE] and [NAME]
Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.
•It can also be set with touch operation.
Note
•During motion picture recording, settings for [PORTRAIT] are used.
•The age and name can be printed out using the “PHOTOfunSTUDIO 6.0 HD Edition” bundled software on the
•If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
•Intelligent ISO sensitivity control is activated, and maximum ISO sensitivity level becomes [ISO400].
•If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the lower left of the screen for about 5 seconds, along with the current date and time.
•The initial setting for the AF Mode is [š].
- 112 -