Recording
[I.DYNAMIC] (Intelligent dynamic range control)
Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to how you see.
Applicable modes: 
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•This feature may be automatically disabled, depending on the lighting conditions.
•[ 
] in the screen turns to yellow when [I.DYNAMIC] is in effect.
•[LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
[ISO LIMIT SET]
It will select optimal ISO sensitivity with set value as limit depending on the brightness of the subject.
Applicable modes: 
[OFF]/[200]/[400]/[800]/[1600]
Note
•The upper limit of the ISO sensitivity can be set.
•The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise.
•It will work when the [SENSITIVITY] is set to [AUTO] or [ 
].
[ISO INCREMENTS]
ISO sensitivity settings between [ISO100] and [ISO6400] are changed for every 1/3 EV.
Applicable modes: 
[1/3 EV]: [100]/[125]/[160]/[200]/[250]/[320]/[400]/[500]/[640]/[800]/[1000]/[1250]/ [1600]/[2000]/[2500]/[3200]/[4000]/[5000]/[6400]
[1 EV]: [100]/[200]/[400]/[800]/[1600]/[3200]/[6400]
Note
•When the setting is changed from [1/3 EV] to [1 EV], ISO sensitivity will be set to value closest to the value set during the [1/3 EV]. (Set value will not restore when the setting is changed back to [1/3 EV]. It will stay as the setting selected for [1 EV].)
- 135 -