Basic
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery.
p[SLEEP MODE]:
The camera is automatically turned off if the camera has not been
q[ECONOMY] used for the time selected on the setting.
[OFF]/[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
•Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
•[SLEEP MODE] is set to [5MIN.] in the Intelligent Auto Mode.
•[SLEEP MODE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•Press any button to turn on the LCD monitor again.
•[SLEEP MODE] does not work in the following cases.
–When using the AC adaptor
–When connecting to a PC or a printer
–When recording or playing back motion pictures
–During a slide show
| Set the length of time that the picture is displayed after taking it. |
|
|
o [AUTO REVIEW] | [OFF]/[1SEC.]/[3SEC.]/[5SEC.] |
| [HOLD]: |
| The pictures are displayed until shutter button is pressed halfway. |
•If it is set to [HOLD] when the camera is set to [ 
] (P34) or [ 
] (P83), switching of the playback screen display (P39) or enlargement by rotating the rear dial is possible during Auto Review.
•Regardless of the Auto Review setting, pictures will automatically be reviewed when taking burst pictures with [H] set (P79), and recording with Auto Bracket (P81). (Will not hold) Under these conditions, [AUTO REVIEW] is disabled.
•If [HIGHLIGHT] (P142) is set to [ON], white saturated areas appear blinking in black and white when the Auto Review function is activated.
•[AUTO REVIEW] is disabled when Burst Mode is set to [M] or [L].
•When [AUTO REGISTRATION] in [FACE RECOG.] (P119) is set to [ON], [AUTO REVIEW] can only be set to [3SEC.] or [5SEC.].
- 62 -