Connecting to other equipment

Connect the camera to a PC via the USB connection cable A

(supplied).

•Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction.

Press 3/4 to select [PC], and then press [MENU/

 

USB MODE

 

 

 

 

PLEASE SELECT

 

SET].

 

 

 

THE USB MODE

 

• If [USB MODE] (P63) is set to [PC] in the [SETUP] menu in

 

PictBridge(PTP)

 

 

PC

 

advance, the camera will be automatically connected to the PC

 

SELECT SET

without displaying the [USB MODE] selection screen. Since

 

 

 

 

 

 

there is no need to set this each time you connect to the PC, it

 

 

 

is convenient.

 

 

 

•When the camera has been connected to the PC with [USB MODE] set to [PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to close the screen, and disconnect the camera from the PC. Then set [USB MODE] to [PC] again.

Double-click on [Removable Disk] in [My Computer].

•When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.)

Double-click [DCIM] folder.

Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.

∫Disconnecting the USB connection cable safely

•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.

Note

•Turn the camera off before connecting or disconnecting the AC adaptor (optional).

•Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed.

- 180 -