|
|
|
|
| Basic |
|
|
|
| ||
|
|
| Setup the output method for 3D pictures. | ||
|
|
|
|
|
|
|
|
| [ | ]: | Set when connecting to a 3D compatible television. |
|
| [3D PLAYBACK] | [ | ]: | Set when connecting to a television not compatible |
|
|
|
|
| with 3D. |
|
|
|
|
| Set this when you would like to view pictures in 2D |
|
|
|
|
| (conventional image) on a 3D compatible television. |
•This will work when the HDMI mini cable (optional) is connected.
•Refer to P167 for the method to playback 3D pictures in 3D.
Adjust the position of the touch panel if a different thing gets selected from what you touched or touch operation does not respond.
1 Press [MENU/SET].
2Touch the orange [r] mark
[CALIBRATION] | displayed on the screen in order |
| with the stylus pen (supplied) |
| (5 places). |
•A message is displayed once the position is set.
3Press [MENU/SET] to finish.
•To accurately calibrate the LCD Monitor, be sure to touch precisely at the designated locations.
~[LANGUAGE] Set the language displayed on the screen.
•If you set a different language by mistake, select [~] from the menu icons to set the desired language.
- 65 -