Recording

About [š] (Face Detection)

The camera automatically detects the person’s face. The focus and exposure can then be adjusted to fit that face no matter what portion of the picture it is in. (max. 15 areas)

When the camera detects a person’s face, the AF area is displayed. Yellow:

When the shutter button is pressed halfway, the frame turns green when the camera is focused.

White:

Displayed when more than one face is detected. Other faces that are the same distance away as faces within the yellow AF areas are also focused.

Note

•Position and size of the AF area can be changed. (P89)

•When [š] is selected and [METERING MODE] is set to multiple [C], the camera will adjust the exposure to suit the person’s face. (P133)

•Under certain picture-taking conditions including the following cases, the Face Detection Function may fail to work, making it impossible to detect faces. The AF Mode is switched to [ ].

–When the face is not facing the camera

–When the face is at an angle

–When the face is extremely bright or dark

–When there is little contrast on the faces

–When the facial features are hidden behind sunglasses, etc.

–When the face appears small on the screen

–When there is rapid movement

–When the subject is other than a human being

–When the camera is shaking

•The camera may detect the subjects other than a person as the face. In this case, switch the AF Mode to any modes other than [š] and then take a picture.

- 86 -