Recording

[REC] Mode:

Taking Pictures using the Built-in Flash

ATo open the flash B To close the flash

Press the flash until it clicks.

• Be sure to close the flash when not in use.

• The flash setting is fixed to [Œ] while the flash is closed.

Note

•Be careful when opening the flash as the flash will jump out.

•Be careful not to catch a finger when closing a flash bulb.

Switching to the appropriate flash setting

Applicable modes:

Set the built-in flash to match the recording.

•Open the flash.

1Select [FLASH] in the [REC] Mode menu. (P56)

2Press 3/4 to select a mode and press [MENU/SET].

•For information about flash settings that can be selected, refer to “Available flash settings by Recording Mode”. (P73)

- 71 -