Playback/Editing
[VIDEO DIVIDE]
Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divide!
1Select [VIDEO DIVIDE] on the [PLAYBACK] Mode menu. (P56)
2Press 2/1 to select the motion picture to divide, and then press [MENU/SET].
•Motion picture is played back.
3Press 3 at the location to divide.
•Motion picture is paused.
Motion picture is played back from the same location when 3 is pressed again.
•You can finely adjust the location for division by pressing 2/1 while the motion picture is paused.
4Press 4.
5Press 2 to select [YES] and then press [MENU/SET].
•Motion picture may be lost if the card or battery is removed while processing the dividing.
•Press [ 
] to return to the menu screen.
Note
•Avoid trying to divide motion picture near the very beginning or end of the motion picture.
•The [VIDEO DIVIDE] feature only works on motion pictures recorded on this camera.
•With [MOTION JPEG] motion pictures, the order of pictures will change if divided.
It is recommended to display these motion pictures by using Calendar Playback (P41) or [MOTION JPEG PLAY] in the [PLAYBACK MODE] (P151).
•With [AVCHD] motion pictures, the order of pictures will not change.
•The [VIDEO DIVIDE] feature will be disabled during the following conditions:
– Motion pictures with a short recording time
- 155 -