Preparation
Attaching/Detaching the Lens
•Check that the camera is turned off.
•Change lenses where there is not a lot of dirt or dust. Refer to P197, P198 when dirt or dust gets on the lens.
Attaching a lens to the camera body
Turn the lens rear cap A and the body cap B in the direction of the arrow to detach them.
•Do not put your hands inside the mount.
Align the lens fitting marks C (red marks) on the camera body and the lens and then rotate the lens in the direction of the arrow until it clicks.
• Do not press the lens release button D when you attach a lens.
• Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched.
Detach the lens cap.
- 15 -