106
Recording
This effect blurs peripheral areas to give the impression of a
diorama.
∫Setting the type of defocus
With [Miniature Effect] you can make the subject stand out by intentionally creating
defocused and in-focus portions. You can set the recording orientation (defocus
orientation) and the position and size of the in-focus portion.
1Press 3 to display the setting screen.
•Setting screen can also be displayed by touching in order of [ ] then [ ].
2Press 3/4 or 2/1 to move the in-focus portion.
•You can also move the in-focus portion by touching the screen on
the recording screen.
•Touching [ ] allow s you to set the recording orientation
(defocus orientation).
3Rotate the rear dial to change the size of in-focus portion.
•The area size can also be changed by pinching out/pinching in (P15) on the screen.
•If you press [DISP.] or touch [Reset], settings for the non-blurred portions are restored to
the initial settings.
4Press [MENU/SET] to set.
•You can also set by touching [Set].
•Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
•No sound is recorded in motion pictures.
•Approximately 1/10 of the time period is recorded. (If you record for 10minutes, the resulting
motion picture recording will be approximately 1minute long.)
The displayed available recording time is approximately 10 times. When switching to Recording
Mode, please check the available recording time.
•When the [Focus Mode] is set to [MF], move the focused location to the in-focus portion.
[Miniature Effect]
Items that can be set
Freshness Understated
colors
Pop
colors
6HW