196
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped
in prints using [Text Stamp] (P197).
1Select [Title Edit] on the [Playback] menu. (P37)
2Press 3/4 to select [Single] or [Multi] and then press [MENU/SET].
4Enter the text. (P64)
A maximum of 30 characters can be entered.
Up to 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ].
Exit the menu after it is set.
To delete the title, erase all the text in the text input screen.
You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
You can set up to 100 pictures at one time with [Multi].
You cannot use [Title Edit] for the following pictures.
Motion pictures
Pictures taken with [ ], [ ] or [ ]
Pictures recorded with other equipment

[Title Edit]

3Select the picture, and then press
[MENU/SET] to set.
[] is displayed for pictures with titles
already registered.
[Multi] setting
1Select the picture, and then press
[MENU/SET] to set (repeat).
The setting is canceled when
[MENU/SET] is pressed again.
2Press 2 to select [OK], and then
press [MENU/SET] to execute.
[Single] [Multi]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.
6HW
2.