233
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 to select [New Connection], and then
press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P214) or [Select a destination from
Favorite]. (P215)
3Press 3/4 to select [Send Images Stored in the Camera], and then press
[MENU/SET].
4Press 3/4 to select [PC], and then press [MENU/SET].
5Press 3/4 to select connection method, and then press [MENU/SET].
6Press 3/4 to select a PC you want to connect, and then press [MENU/SET].
7Press 3/4 to select the folder you want to send, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P224)
8
Press
3
/
4
to select [Single Select] or [Multi Select] and then press [MENU/SET].
To change the setting or disconnect, press [Wi-Fi]. (P221)
9Select and send the images. (P232)
Folders sorted by the sent date are created in the specified folder, and pictures are saved in
those folders.
If the screen for a user account and password entry appears, enter the one you set on your PC.
When sending images to PC
Preparations:
Turn the computer on.
Prepare folders for receiving images on the PC before sending a picture to the PC. (P226)
[Via Network]
When you want to connect to your PC via a wireless access point. (P217)
[Direct] When you want to directly connect your PC to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (P219)
ョㄏヒ
ヸㄊノョㄊ