156
Recording
Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1Select [Auto Bracket] in the [Rec] menu. (P37)
2Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then
press 1.
3Press 3/4 to select the setting and then press [MENU/SET].
You can take one picture at a time when set to [ ].
You can continuously take pictures up to set numbers when set to [ ].
Exit the menu after it is set.
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
The exposure may be compensated incorrectly, depending on the brightness of the subject.
When taking pictures continuously using Auto Bracket with [i.Resolution] set to [EXTENDED], it
may take time to record all the set num ber of pictures.
Auto Bracket is disabled in the following cases.
[Glistening Water]/[Glittering Illumi nations]/[Soft Image of a Flower] (Scene Guide Mode)
[Miniature Effect]/[Soft Focus]/[Star Filter] (Creative Control Mode)
When White Balance Bracket is set.
When recording motion pictures
When recording using the flash
When [HDR] is set to [ON]
[Multi Exp.]
When using [Time Lapse Shot]
Item Settings
[Single/Burst Settings] [ ] (single)
[ ] (burst)
[Step]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
[Sequence] [0/`/_]
[`/0/_]