199
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divide!
1Select [Video Divide] on the [Playback] menu. (P37)
2Press 2/1 to select the motion picture to divide, and then press [MENU/SET].
The [Video Divide] feature only works on motion pictures recorded on this camera.
Motion pictures cannot be divided at a location close to the start or end of the motion picture.
If you divide a [MP4] or [MOV] motion picture, the display order of images changes.
It is recommended to search these motion pictures by using Calendar Playback (P77) or [Video
Only] in the [Playback Mode].
You cannot use [Video Divide] for the following pict ures.
Motion pictures with a shor t recording time

[Video Divide]

3Press 3 at the location to divide.
Motion picture is played back from the same location when 3 is
pressed again.
You can finely adjust the location for division by pressing 2/1
while the motion picture is paused.
4Press 4.
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Motion picture may be lost if the card or battery is removed while processing the dividing.