21
Preparation
1Attach the lens cap.
2While pressing on the lens release button B,
rotate the lens toward the arrow until it stops
and then remove.
Always attach the body cap to the camera body so that dirt
or dust does not get inside.
Attach the lens rear cap so that the lens contact point does
not get scratched.
It is recommended to attach the lens cap or attach the MC Protector (optional) to protect the
lens surface when carrying. (P269)
When recording into strong backlight, irregular reflection may occur within the lens. The
lens hood reduces the inclusion of unwanted light in the recorded images and lowers the
drop in contrast. The lens hood cuts off excess lighting and improves the picture quality.
To attach the lens hood (flower shape) that came with the interchangeable lens
(H-HS12035, H-VS014140)
When temporarily detaching and carrying the lens hood, attach the lens
hood to the lens in the reverse direction.
Hold the short sides of the flower shaped lens hood when attaching or
detaching it.
Detaching the lens
Attaching the Lens Hood
Insert the lens hood into the lens
with the short sides at the top and
bottom, and turn in the direction
of the arrow until it stops.
AFitting to the mark.