214
Wi-Fi
Read the [Help] in the “LUMIX LINK” menu for further details on how to operate.
To quit [Remote Shooting], press [Wi-Fi].
Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
If you have changed the clock setting of this unit or the smartphone/tablet after [Timesync],
perform [Timesync] again.
On the smartphone/tablet, you can set the acquisition interval of location information and check
the transfer status of location information. Refer to [Help] in the “LUMIX LINK” menu for details.
The smartphone/tablet may fail to acquire location information in China and the border area in
the neighbouring countries of China. (As of October 2012)
(When using “LUMIX LINK” for iOS)
If you press the Home or On/Off button of a smartphone/tablet while [Rec. loc. Info] is working,
location information recording is stopped.
If you want to make a Wi-Fi connection with the setting you used before, you can select it
from the history, and connect.
The number of settings that can be saved in the history is limited. It is recommended that you
save frequently used Wi-Fi connection settings in [Select a destination from Favorite]. (P215)
Performing [Reset Wi-Fi Settings] clears the history and the contents saved in [Select a
destination from Favorite].
1Press [Wi-Fi].
2Press 3/4 to select [Select a destination from
History], and then press [MENU/SET].
3Select the desired connection setting with 3/4, and then
press [MENU/SET].
To display the connection detail, press [DISP.].
To save the selected connection setting in [Select a destination
from History], read steps 3 and 4 of “Registering to favorites”. (P215)

[Select a destination from History]

ョㄏヒ
ヸㄊノョㄊ