219
Wi-Fi
Check the wireless access points instruction manual and settings when a saving wireless
access point.
If no connection can be established, the wireless access point’s radio waves may be too weak.
Refer to Message Display (P274) and Troubleshooting (P286) for details.
Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Directly connect this unit to the device you are using as a wireless access point. You can
connect this unit and your device in a method supported by your device.

Press 3/4 to select connection method, and then press [MENU/SET].

Connecting directly

Connection method Description of settings
[Wi-Fi Direct]TM
1Set the device to Wi-Fi Direct mode.
2Press 3/4 to select [Wi-Fi Direct] and then press
[MENU/SET].
3Press 3/4 to select the device to connect to, and then
press [MENU/SET].
Read the operating instructions of your device for details.
[WPS Connection]
[WPS (Push-Button)]
1Press 3/4 to select [WPS (Push-Button)] and then press
[MENU/SET].
2Set the device to WPS mode.
You can wait longer for a connection by pressing the [DISP.]
button on this unit.
[WPS (PIN code)]
1Press 3/4 to select [WPS (PIN code)] and then press
[MENU/SET].
2Enter the PIN code of the device into this unit.
[Manual Connection]
Enter the SSID and password into the device. The SSID and
password are displayed on the connection waiting screen of this
unit.