237
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 to select [New Connection], and then
press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P214) or [Select a destination from
Favorite]. (P215)
3Press 3/4 to select [Send Images Stored in the Camera], and then press
[MENU/SET].
4Press 3/4 to select [AV device], and then press [MENU/SET].
5Press 3/4 to select [Home] or [External], and then press [MENU/SET].
6Press 3/4 to select connection method, and then press [MENU/SET].
When [External] is selected, the screen for setting a wireless access point is displayed.
(P217)
7Press 3/4 to select a device you want to connect, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P224)
8
Press
3
/
4
to select [Single Select] or [Multi Select] and then press [MENU/SET].
To change the setting or disconnect, press [Wi-Fi]. (P221)
9Select and send the images. (P232)

When sending images to AV device

Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
Registration to “LUMIX CLUB” (P239)
Address number and access number acquired by the destination External AV device. (P243)
[Via Network] When you want to connect to an AV device via a wireless access
point. (P217)
[Direct] When you want to directly connect an AV device to this unit with
[Wi-Fi Direct], [WPS Connection], or [Manual Connection]. (P219)
ョㄏヒ
ヸㄊノョㄊ