298
Others
Is it connected properly with the HDMI mini cable (optional)? (P250)
>Confirm that the HDMI mini cable (optional) is firmly fitted.
>Press [(] on this unit.
Is the [VIERA Link] on this unit set to [ON]? (P50)
>Depending on HDMI terminal of the TV, the input channel may not switch automatically. In
this case, use the remote control fo r the TV to switch input. (For details on h ow to switch
input, please read the operating instructions for the TV.)
>Check the VIERALink setting on the connected device.
>Turn this unit off and on.
>Set [HDAVI Control] to [Off] on the TV and then turn it back to [On]. (Refer to the operating
instructions of the TV for details.)
Is the camera connected to the PC correctly?
Is the camera recognized by the PC correctly?
>Set to [PC] in [USB Mode]. (P48, 257)
>Turn this unit off and on.
>Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
>If there are two or more USB terminal on a single PC, try connecting the USB connection
cable to another USB terminal.
>Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
>A message prompting to format the card may be displayed when connecting, but do not
format.
>If the [Access] displayed on the monitor does not disappear, disconnect the USB
connection cable after turning this unit off.
Pictures cannot be printed using a printer that does not support PictBridge.
>Set to [PictBridge(PTP)] in [USB Mo de]. (P48, 260)
VIERA Link does not work.
Cannot communicate with the PC.
The card is not recognized by the PC.
The card is not recognized by the PC. (SDXC memory card is used)
The picture cannot be printed when the camera is connected to a printer.