218
Wi-Fi
Search for available wireless access points.
Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the
wireless access point you are using.
1Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
Touching [DISP.] will search for a wireless access point again.
If no wireless access point is found, refer to When connecting
with [Manual Input] on P218.
2(If network authentication is encrypted)
Enter the encryption key.
For details on how to enter characters, refer to Entering Text
section on P64.
When connecting with [Manual Input]
1On the screen displayed in step 1 of “If you are not sure about the WPS
compatibility (connecting by [Manual Connection])”, select [Manual Input] by
pressing 3/4, then press [MENU/SET].
2
Enter the SSID of the wireless access point you are connecting to, then select [Set].
For details on how to enter characters, refer to Entering Text section on P64.
3Press 3/4 to select the network authentication type, and press [MENU/SET].
For information on network authentication, see the manual of the wireless access point.
4Press 3/4 to select the encryption type, and press [MENU/SET].
The type of settings that can be changed may vary depending on the details of network
authentication settings.
5(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
If you are not sure about the WPS compatibility (connecting by [Manual Connection])
Network authentication type Encryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]/[WEP]