165
Recording
Applicable modes:
You can shoot up to four exposures per image.
1Select [Start] and then press [MENU/SET].
2Decide on the composition, and take the first picture.
After taking the picture, press the shutter button halfway down to
take the next picture.
Press 3/4 to select the item and then press [MENU/SET] for
one of the following operations.
3Shooting the second, third, and fourth exposures.
If [MENU/SET] is pressed while taking pictures, the photographed images are recorded,
and the multiple exposure picture-taking session will be completed.
4Press 4 to select [Exit] and then press [MENU/SET].
You can also press the shutter button halfway to finish.
About Automatic Gain Control setting
Select [Auto Gain] on the screen shown in step 1 and set it.
Combining RAW images in the card
On the screen shown in step 1, set [Overlay] to [ON]. After [Start], Images in the card will
be displayed. Select the RAW images, press [MENU/SET], and continue recording.
[Overlay] is available only for RAW images taken with this unit.
Image is not recorded until completion.
The recording information displayed for pictures taken with multiple exposures is the recording
information for the last picture taken.
Items shown in gray on the menu screen cannot be set during multiple exposures.
This operation is not available when using [Time Lapse Shot].

[Multi Exp.]

[Next]: Advance to the next picture.
[Retake]: Return to the first picture.
[Exit]: Record the image of the first picture, and finish
the multiple exposure picture-taking session.
[ON]: The brightness level is adjusted according to the number of pictures taken and the
pictures are superimposed over each other.
[OFF]: Compensate the exposure to match the subject so that all the superimposed
exposure effects will be just right.
([LW
5HWDNH
1H[W
([LW
5HWDNH