Preparation
∫Unusable batteries
Manganese | Lithium batteries |
batteries |
|
|
|
Nickel batteries | |
|
|
•Operations by using the batteries listed above are not guaranteed. If the batteries listed above are used, leakages can result and the following malfunctions can occur;
–Remaining battery power may not be displayed accurately.
–The camera may not be turned on.
–Data written to the
∫Shapes of batteries that cannot be used
•Batteries with unusual shapes cause leakage, generation of heat or explosion if they are inserted in the camera.
•Some commercial batteries have partially or entirely peeled outer coverings. Never use these batteries. (Refer to the illustration below.)
• All or part of the | • - polarity is flat |
seal of batteries |
|
are peeled off |
|
|
|
∫Battery indication
The remaining battery power appears on the screen. [It does not appear when you use the camera along with the AC adaptor
•The battery indication turns red and blinks. (If the LCD monitor is turned off, the status indicator blinks.)
•Replace with new batteries or fully charged
∫Proper Care and Handling of the
Batteries
If you mishandle the batteries, leakage, generation of heat and fire or explosion may occur. Observe the following cautions;
•Do not subject the batteries or the battery contacts to any moisture.
•Do not peel off or scratch the covered seal.
•Do not drop, hit or do anything that causes impact to the batteries.
•Do not use batteries that show signs of leakage, deformation, discoloration or other defects.
•Do not store batteries in high humidity or high temperature environments.
•Keep batteries away from children.
•When you replace batteries, always use two of the same type.
•If you will not be using the camera for a long time, remove the batteries.
•Batteries may become warm soon after you use the camera. To remove the batteries, turn the camera off and then wait until the battery temperature becomes lower.
14
VQT0P65